• Clamp opens up to 1 inch (25.4 mm) .
• One rotary switch operation.
• Large 4 digit LCD display.
• AC/DC Voltage measurement up to 600 Volt.
• AC/DC current measurement up to 600 A.
• Relative measurement
• One touch auto zero.
• Peak Hold Function
• Data Hold Function
• Resistance measurement.
• 2 readings per second sampling
• Continuity check with audible indicator.
• Protective hand guard.
• Low battery indicator.
• Auto power off.
• 50 hrs in use battery life.
• Soft carrying deluxe pouch.
• Test leads and batteries included.
  

• Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc.
  Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
  Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
  An essential tool for all around troubleshooting of electrical and electronic circuit and systems.
  
  

Ergonomic Features:

• The new smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient
• Large easy to read 0.393" (10 mm) digits display
• Single knob selects functions
• Peak hold function
• Display data hold
• Rugged plastic enclosure
• Design allows comfortable handling
  
  

For use in:

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 600 Volt AC/ DC powered circuits
  

• Display:
  • 4 Digit LCD (Max reading 600.0)
  • 0.393"(10 mm) Digits
  • Units indicator
  • Relative measure indicator
  • Display data hold indicator
  • Peak hold indicator
  • VDC/VAC indicator
  • Continuity indicator
  • Automatic over-range indication
  • Automatic( - ) negative polarity indicator
  • One touch button auto zeroing
  • Auto power off
  • Low battery indicator
• Power Source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
• Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long
• Physical dimensions (including holster) :7.44” (H) x 2.75” (W) x 1.33” (D) - 189mm (H) x 70 mm (W) x 34 mm (D)
• Weight: Approximately 7.76 Oz ( 220 g) Including battery
  
• Electrical Specifications:
  • DC Voltage: ± 1% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection
  • AC Voltage: ±1.5% ± 5 dgts., 50 to 200 Hz, 600 V ac/dc maximum, 600Vrms overload protection
  • DC Current: ± 2.5 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
  • AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
  • Resistance: ±1% ± 3 dgts., 660Vrms overload protection
  • Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 100 O, max. voltage test < 3 Vdc.