• State of the Art ergonomic design and styling for easier handling and use
• Full autorange features
• Large 4 digit LCD display with analog bargraph
• AC/DC Voltage measurement up to 600 Volt
• AC/DC Current measurement up to 10 A
• Tachometer function with inductive pickup measures from 30 to 20000 rpm
• Dwell measurement in degrees from 0 to 360º or duty cycle from 0 to 100%
• Temperature measurement from -20ºC to 500ºC or 0º to 932ºF (selectable ºC or ºF)
• Resistance measurement up to 40 MOhm
• Frequency measurement from 10 to 20 KHz
• Fuel Injection test measures pulse width from 0.05 to 250 mS, or duty cycle from 0 to 100%
• Diode test
• Continuity Test
• Overload protection
• Soft holster for instrument protection
• Auto power off
  
  

• Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning, heating system, catalytic converter, etc.
• Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems.
  

Ergonomic Features:

• The smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient
• Single knob selects function and range
• Rugged plastic enclosure
• Soft anti-slip rubber holster protects the instrument against impacts and chemicals
• Large easy to read 1/2" (12.5 mm) digits display
• Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster
  

For use in:

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 600 Volt AC/ DC powered circuits
  

• Display:
  • 4 Digit LCD ( 9999 max. counts)
  • 4 updates/second
  • 42 Segments analog bargraph (20 updates/Second)
  • Automatic( - ) negative polarity indicator
  • Automatic Zeroing
  • Automatic over-range indication
  • Low battery indicator
• Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
  Physical dimensions (including holster) : 6.30” (H) x 3.22” (W) x 1.89” (D) - 160 mm x 82 mm x 48 mm
  Weight: Approximately 12.14 Oz ( 345 g) Including battery
  
• Electrical Specifications:
  • DC Voltage: 0 to ± 600V, ±0.3% ± 2 dgts., 10MO input impedance
  • AC Voltage: 0 to 600V, ±2.5% ± 5 dgts., 10MO input impedance, 50 to 500 Hz
  • DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts., AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.
  • Resistance: 0 to 40 MO ± 0.8% ± 5 dgts.,
  • Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.
  • Tachometer: 30 to 20000 RPM, ± 2 RPM
  • Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d
  • Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d
  • Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
  • Temperature: -20º to 500°C or 0°F to 932°F (±2% + 1 dgts.)
    

• Battery: 9 Volt alkaline battery included
• Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long
• Temperature probe: Bead type K thermocouple
• Inductive Pickup for tachometer function
• Hard Storage/Carrying Case: Polypropylene foam padded case
• Soft protective holster
• User Manual